Target torque and torque being applied are shown on a LCD display
Single-function keys are easy and fast to use
This wrench has all the functionality of a dial wrench, but is 3 times as accurate
The 45-tooth reversible ratchet head results in both clockwise and counter clockwise, fine increment operation
Ratchet head flexes up to 15 degrees in either direction
Square drive: 1/4, 3/8, 1/2 and 3/4 inch
Minimum torque: 2Nm
Maximum torque: 300Nm
Torque units: Nm, Lb.in and Lb.ft
Large LCD display
Desired torque is easily set using two keys
When applied torque is near target torque, yellow LED lights up. When torque is within 2% of target, red LCD blinks and the buzzer beeps. At the target torque the red LED lights up and the buzzer sounds continuously
Display retains maximum torque reached until reset
% Deviation from set torque is automatically calculated and displayed together with appropriate color LCD
Accuracy: +/-2% CW of readings from 20% to 100% of full scale, +/-3% CCW of readings from 20 to 100% of full scale
Runs for up to 40 hours on 2 standard AA batteries
Supplier and product information updated April 29, 2012.
Verified Business Registration Details
Registered Company:
上海优拜机械有限公司
Business Registration Number: 310226000354985
Company Registration Address: 上海市奉贤区青村镇钱桥路168号 * In some jurisdictions, company names and addresses are registered in Chinese only.
